Cooling system hand pump
16 colour coded adaptors
Excludes Vacuum purge and refill kit and thermometer
Vehicle application list (R&D specifically for Australian and NZ markets)
Instruction manual
ATTRIBUTES
Instructions Step 1:
Remove the original radiator cap.

Step 2:
Select correct adaptor for the vehicle from the vehicle application list and install on cooling system tank or radiator.

Step 3:
Connect the pump to the adaptor and pressurise the system between 10-15psi. Caution: avoid pressurising system up to 35psi.

Step 4:
Check gauge reading for loss of pressure. Identify the pressure leak with the system and repair.

Step 5:
Re-check system pressurisation.
ITEM CONTENTS
Code Name Qty
308503 Cooling System Tester Adaptor – No.3 1
308504 Cooling System Tester Adaptor – No.4 1
308505 Cooling System Tester Adaptor – No.5 1
308506 Cooling System Tester Adaptor – No.6 1
308507 Cooling System Tester Adaptor – No.7 1
308508 Cooling System Tester Adaptor – No.8 1
308509 Cooling System Tester Adaptor – No.9 1
308510 Cooling System Tester Adaptor – No.10 1
308511 Cooling System Tester Adaptor – No.11 1
308512 Cooling System Tester Adaptor – No.12 1
308513 Cooling System Tester Adaptor – No.13 1
308514 Cooling System Tester Adaptor – No.14 1
308515 Cooling System Tester Adaptor – No.15 1
308517 Cooling System Tester Adaptor – No.17 1
308519 Cooling System Tester Adaptor – No.19 1
308520 Cooling System Tester Adaptor – No.20 1
308553 Cooling System Tester Adaptor – Gauge & Pump Assembly 1
308556 Cooling System Tester Adaptor – Handle 1
308554 Cooling System Tester Connector – No.2 Black 1
308555 Cooling System Tester Connector – No.2 Blue 1