2 B&S (35mm²) Extension Lead x 6.5m 12/24V — 175A Anderson Plug & Cover Assembly

This 2 B&S extension lead extends an existing 12V or 24V Anderson connection so you can run high-current power exactly where you need it — out to a caravan, trailer, winch, or across a BCDC/DC-DC charging setup. It’s built on Australian-made 2 B&S (35mm²) twin-sheath copper cable, sized to keep voltage drop low over its 6.5-metre run under heavy load, and finished with a 175A Anderson-style connector. Every lead is assembled ready to connect: fused, terminated and protected, straight out of the box.

Key features

• Australian-made 2 B&S dual-core, twin-sheath copper cable (35mm²), 6.5m
• Rated for up to 184A continuous — higher peaks for short bursts
• 175A Anderson-style connector for a secure, high-current auxiliary connection
• Genuine Trailer Vision 175A connector cover assembly
• Full-length split-tube protection (6.5m) against abrasion and heat
• Two heavy-duty M8 cable lugs for a clean battery-end termination
• 200A Midi fuse with inline Midi fuse holder for circuit protection

Specifications

What it suits

Ideal for BCDC and DC-DC charging systems, dual-battery setups, and running power out to a caravan, camper, trailer or winch. The 175A Anderson-style connector matches common auxiliary and dual-battery fitments, and the 2 B&S cable gives you the headroom to carry high current over a 6.5-metre run without excessive voltage drop.

Build options

• Cable length can be made to suit — contact us for a quote on a custom run
• Fuse rating can be changed to match your setup
• Trailer Vision flush (panel) mount available as an alternative to the surface mount shown

Australian Made

This lead is built with a majority of Australian-made components and assembled by hand in our Queensland workshop. Our 12/24V premade lead range carries Australian Made accreditation — so you’re getting a quality, locally built product and supporting an Australian small business at the same time.

══════════ FAQ ══════════

What is a 2 B&S extension lead used for? It extends an existing 175A Anderson connection so you can run high-current 12V or 24V power further — to a caravan, trailer, winch, or a DC-DC/BCDC charging setup. This lead uses 2 B&S (35mm²) twin-sheath copper cable over 6.5 metres to keep voltage drop low under heavy loads.

How much current can this lead handle? The 2 B&S (35mm²) cable is rated for up to 184A continuous, with higher peaks for short bursts. It’s protected by a 200A Midi fuse and inline holder, and terminated with a 175A Anderson-style connector.

What’s included with the lead? You get the 6.5m 2 B&S lead fitted with a 175A Anderson-style connector and a genuine Trailer Vision 175A cover assembly, full-length split-tube protection, two heavy-duty M8 cable lugs, and a 200A Midi fuse with inline holder. It’s ready to connect out of the box.

Can I get a different length or fuse rating? Yes — the cable length can be made to suit and the fuse rating can be changed on request. Contact Bluebar for a quote on a custom build.

Does it suit dual battery and DC-DC systems? Yes — it’s ideal for BCDC/DC-DC charging systems and dual-battery setups where you need to carry high current over distance. The 175A Anderson-style connector matches common auxiliary and dual-battery fitments.

Is this extension lead Australian Made? Yes. It’s built with a majority of Australian-made components and assembled in Bluebar’s Queensland workshop, and the 12/24V premade lead range carries Australian Made accreditation.

Built to spec. Made for the track.