2 B&S (35mm²) Extension Lead x 6m 12/24V — 120A Anderson Plug & Cover Assembly

This 2 B&S extension lead extends an existing 12V or 24V Anderson connection so you can run power exactly where you need it — out to a caravan, trailer, winch, or across a BCDC/DC-DC charging setup. It’s terminated with a 120A Anderson-style connector and matching housing, and built on heavy Australian-made 2 B&S (35mm²) twin-sheath copper cable. That cable is deliberately oversized for the job, keeping voltage drop low and the lead running cool over its 6-metre run. Every lead is assembled ready to connect: fused, terminated and protected, straight out of the box.

Key features

• Australian-made 2 B&S dual-core, twin-sheath copper cable (35mm²), 6m
• Heavy 35mm² gauge oversized for the run — low voltage drop, runs cool
• 120A Anderson-style connector with matching 120A housing
• Full-length split-tube protection (6m) against abrasion and heat
• Two heavy-duty M8 cable lugs for a clean battery-end termination
• 150A Midi fuse with inline Midi fuse holder for circuit protection

Specifications

What it suits

Ideal for BCDC and DC-DC charging systems, dual-battery setups, and running power out to a caravan, camper, trailer or winch. The 120A Anderson-style connector matches common auxiliary and dual-battery fitments, and the heavy 2 B&S cable gives you generous headroom to carry current over a 6-metre run without excessive voltage drop.

This lead suits popular DC chargers including the EcoFlow 48V charger and the Redarc Alpha50 and Alpha100 DC-DC chargers.

Build options

• Cable length can be made to suit — contact us for a quote on a custom run
• Fuse rating can be changed to match your setup
• Flush (panel) mount housing available as an alternative to the surface mount shown

Australian Made

This lead is built with a majority of Australian-made components and assembled by hand in our Queensland workshop. Our 12/24V premade lead range carries Australian Made accreditation — so you’re getting a quality, locally built product and supporting an Australian small business at the same time.

══════════ FAQ ══════════

What is a 2 B&S extension lead used for? It extends an existing Anderson connection so you can run 12V or 24V power further — to a caravan, trailer, winch, or a DC-DC/BCDC charging setup. This lead uses heavy 2 B&S (35mm²) twin-sheath copper cable over 6 metres to keep voltage drop low.

How much current can this lead handle? The lead is built around a 120A Anderson-style connector, so it suits circuits up to that 120A rating. The 2 B&S (35mm²) copper cable is oversized for the job — which keeps voltage drop low and the cable running cool — and it’s protected by a 150A Midi fuse and inline holder.

What’s included with the lead? You get the 6m 2 B&S lead fitted with a 120A Anderson-style connector and matching 120A housing, full-length split-tube protection, two heavy-duty M8 cable lugs, and a 150A Midi fuse with inline holder. It’s ready to connect out of the box.

Can I get a different length or fuse rating? Yes — the cable length can be made to suit and the fuse rating can be changed on request. Contact Bluebar for a quote on a custom build.

Does it suit dual battery and DC-DC systems? Yes — it’s ideal for BCDC/DC-DC charging systems and dual-battery setups. The 120A Anderson-style connector matches common auxiliary and dual-battery fitments.

Does this lead work with the EcoFlow 48V charger and Redarc Alpha chargers? Yes — this lead suits the EcoFlow 48V charger and the Redarc Alpha50 and Alpha100 DC-DC chargers. The 120A Anderson-style connector and heavy 2 B&S (35mm²) cable are well suited to these charging setups.

Is this extension lead Australian Made? Yes. It’s built with a majority of Australian-made components and assembled in Bluebar’s Queensland workshop, and the 12/24V premade lead range carries Australian Made accreditation.

Built to spec. Made for the track.