The Littelfuse MDB series is an internally bussed, water-proof and dust-proof fuse holder developed for high current loads, and harsh conditions.

The unit is wellsuited for near-the-battery applications and can be mounted in exposed locations to fit your design.

A single input power cable connects to a 3 pole busbar to feed either 2 or 3 Midi fuse protected output cables.

Eliminates splices multiple fuse holders. In addition, 2 spare Midi fuses can be & fitted to the inside of the cover using the included screws.

Very high IP Rating.

Voltage: 58VDC max.
Maximum Total Current: 200A
Wire Size: 16 or 25mm2 (input cable), 6 to 16mm2 (output cables)
Temperature Rating: -40°C to + 85°C.
Body & Cover:  UL 94-V0.
IP69K Ingress Protection Rating: IP67 when cover, cable seals ,  & caps
are installed. Cables must not exceed the minimum bend radius advised in
the included instruction sheet to ensure seal integrity.
Cavity Plug: Included cavity plug must be fitted if using only 2 x Midi fuses.
Mounting: Surface mount using 3 fixing holes (M6 or 0.25″).
Suit Fuse: Midi fuses.

** Does not include Midi Fuses…