Anderson Plug Panel Mount Kit – 120A or 175A

This Anderson plug panel mount kit gives you a neat, permanent high-current connection point that sits flush in a panel, canopy, drawer system or battery box. Pick the 120A or 175A version to suit your cable and load. Each kit comes complete with the housing, a grey Anderson-style plug, terminals and mounting screws, so there is nothing extra to source before you fit it.

The flip cover closes tightly and has an internal lip that sits around the plug opening. When the cover is shut, that lip helps keep moisture, dust and road grime off the contacts.

Key features

• Complete Anderson flush mount kit: housing, plug, terminals and screws
• Tight-closing hinged cover with an internal lip to help keep moisture out
• Compact 80 × 65mm face on both ratings for a tidy panel layout
• 120A version suits cable up to 4 B&S; 175A version suits cable up to 2 B&S
• Terminals can be crimped or soldered
• Grey plug supplied as standard; other plug colours available on request
• Plug suits SB120 or SB175 type Anderson-style connectors

Specifications

Which Anderson panel mount do I need?

Choose 120A for medium-current runs on cable up to 4 B&S, such as solar inputs, DC-DC charger feeds and accessory power points.

Choose 175A for heavier cable up to 2 B&S, such as dual battery links, trailer and camper charging feeds and high-draw loads.

Check the cut-out size for your rating before you cut the panel, and allow for the full depth behind it.

Where it suits

• 4WD and ute canopies, drawer systems and rear panels
• Caravan, camper trailer and motorhome external power points
• Battery boxes and portable power setups
• Workshop, trade vehicle and marine DC installations

Built to spec. Made for the track.

Anderson Plug Panel Mount – FAQ

What is an Anderson plug panel mount used for?

It mounts an Anderson-style plug flush in a panel so you have a fixed, covered high-current connection point. It is commonly fitted to canopies, caravans, campers and battery boxes for charging, solar and accessory power.

What size panel cut-out do I need?

The 120A version needs a 52 × 34mm cut-out and the 175A version needs a 62 × 36mm cut-out. Both have an 80 × 65mm face, so the visible housing is the same size either way.

What cable size does each version suit?

The 120A kit suits cable up to 4 B&S and the 175A kit suits cable up to 2 B&S. The included terminals can be crimped or soldered.

What comes in the kit?

Each kit includes the panel mount housing with flip cover, a grey Anderson-style plug, terminals and mounting screws. Everything needed to fit it is in the pack.

Does the cover keep water out?

The cover closes tightly and has an internal lip that helps keep moisture and dust out of the plug when shut. It is not rated as waterproof, so mount it where it will not sit under water or direct spray.

How much depth do I need behind the panel?

Allow at least 70mm for the 120A version and 85mm for the 175A version, plus room for the cable to bend. Check behind the panel before you cut.

Can I get a different plug colour?

Yes, other plug colours are available on request. Grey is supplied as standard, so contact us before ordering if you need a different colour.